Applying Lacing Tape with Bone Casing
- To ascertain the length of lacing tape you need, measure the back
edge of your corset where the lacing tape will be sewn to. (Note:
you may have to remove part of the pattern if it has the grommet section
on it) You will need two times this length – one for each center back.
- Open the folded edge of the lacing tape and place the lacing tape
right side to right side of the corset back with raw edges together.
- Stitch, following the fold line. Flip the bone casing into place
and keep the raw edges (just sewn) in between the folded edges of
the lacing tape.
- Top stitch and you are done.
- Slide in the bones of your choice 50-8206- series or 50-8308- series
both fit. Bind the top and bottom edges as usual.
|
